Installing a hard-drive backplane into, An expansion hard-drive carrier, Figure 2-14 – Dell PowerEdge C8000 User Manual
Page 51
Installing System Components
51
Figure 2-14. Removing and Installing a Hard-Drive Backplane from an Expansion
Hard-Drive Carrier
Installing a Hard-Drive Backplane Into an Expansion Hard-Drive Carrier
CAUTION:
Many repairs may only be done by a certified service technician. You
should only perform troubleshooting and simple repairs as authorized in your
product documentation, or as directed by the online or telephone service and
support team. Damage due to servicing that is not authorized is not covered by
warranty. Read and follow the safety instructions that came with the product.
1 Align the hard-drive backplane with the screw holes on the hard-drive tray.
2 Replace the three screws securing the hard-drive backplane to the hard-
drive tray. See Figure 2-14.
1
standard hard-drive carrier
2
hard-drive tray
3
hard-drive backplane
4
screws (3)
5
strap handle
6
hard-drive carrier notch
2
3
1
4
5
6