Replacing the camera board – Dell Inspiron 11z (1110, Mid 2009) User Manual
Page 10
Replacing the Camera Board
1.
Follow the procedures in
Before You Begin
.
2.
Replace the camera board on the display cover.
3.
Connect the camera cable to the connector on the camera board.
4.
Replace the display panel (see
Replacing the Display Panel
).
5.
Replace the display bezel (see
Replacing the Display Bezel
).
6.
Replace the hinge caps (see
Replacing the Hinge Caps
).
7.
Replace the display assembly (see
Replacing the Display Assembly
).
8.
Replace the palm rest bracket (see
Replacing the Palm Rest Bracket
).
9.
Replacing the memory module (see
Replacing the Memory Module
).
10.
Replace the hard drive (see
Replacing the Hard Drive
).
11.
Connect the speaker cable to the speaker cable connector on the I/O board (see
Replacing the Speakers
).
12.
Replace the palm rest (see
Replacing the Palm Rest
).
13.
Replace the keyboard (see
Replacing the Keyboard
).
14.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.