Coin-cell battery, Removing the coin-cell battery, Replacing the coin-cell battery – Dell Inspiron 11z (1110, Mid 2009) User Manual
Page 45
Back to Contents Page
Coin-Cell Battery
Dell™ Inspiron™ 11 Service Manual
Removing the Coin-Cell Battery
Replacing the Coin-Cell Battery
Removing the Coin-Cell Battery
1.
Follow the procedures in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the keyboard (see
Removing the Keyboard
).
4.
Remove the palm rest (see
Removing the Palm Rest
).
5.
Disconnect the speaker cable from the speaker cable connector on the I/O board (see
Removing the Speakers
).
6.
Remove the hard drive (see
Removing the Hard Drive
).
7.
Remove the memory module (see
Removing the Memory Module
).
8.
Remove the palm rest bracket (see
Removing the Palm Rest Bracket
).
9.
Remove the Bluetooth card (see
Removing the Bluetooth Card
).
10.
Disconnect the coin-cell battery cable from the system board connector.
11.
The coin-cell battery is glued to the system board. Using a plastic scribe pry the coin-cell battery from the system board.
Replacing the Coin-Cell Battery
1.
Follow the procedures in
Before You Begin
.
2.
Use the adhesive on the coin-cell battery and adhere it to the system board.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1
coin-cell battery
2
system board connector