Replacing the ac adapter connector – Dell Inspiron 11z (1110, Mid 2009) User Manual
Page 3
Replacing the AC Adapter Connector
1.
Follow the procedures in
Before You Begin
.
2.
Place the AC adapter connector on the system board.
3.
Connect the AC adapter connector cable to the system board connector.
4.
Route the Mini-Card antenna cables through the routing guides.
5.
Connect the antenna cables to the WWAN card, if applicable (see
Replacing the WWAN Card
).
6.
Connect the antenna cables to the WLAN card, if applicable (see
Replacing the WLAN Card
).
7.
Replace the I/O board (see
Replacing the I/O Board
).
8.
Replace the palm rest bracket (see
Replacing the Palm Rest Bracket
).
9.
Replace the memory module (see
Replacing the Memory Module
).
10.
Replace the hard drive (see
Replacing the Hard Drive
).
11.
Connect the speaker cable to the speaker cable connector on the I/O board (see
Replacing the Speakers
).
12.
Replace the palm rest (see
Replacing the Palm Rest
).
13.
Replace the keyboard (see
Replacing the Keyboard
).
14.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.