Replacing the palm rest bracket – Dell Inspiron 11z (1110, Mid 2009) User Manual
Page 42
10.
Lift the palm rest bracket off the computer base.
Replacing the Palm Rest Bracket
1.
Follow the procedure in
Before You Begin
.
2.
Place the palm rest bracket on the computer base.
3.
Replace the four screws that secure the palm rest bracket to the computer base.
4.
Connect the power button cable to the system board connector.
5.
Turn the computer over and replace the four screws that secure the palm rest bracket to the computer base.
6.
Replace the hard drive (see
Replacing the Hard Drive
).
7.
Replace the speakers (see
Replacing the Speakers
).
8.
Replace the palm rest (see
Replacing the Palm Rest
).
9.
Replace the keyboard (see
Replacing the Keyboard
).
10.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
1
power button cable
2
screws (4)
3
palm rest bracket
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.