Speakers, Removing the speakers, Replacing the speakers – Dell Inspiron 11z (1110, Mid 2009) User Manual
Page 49
Back to Contents Page
Speakers
Dell™ Inspiron™ 11 Service Manual
Removing the Speakers
1.
Follow the procedures in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the palm rest (see
Removing the Palm Rest
).
4.
Disconnect the speaker cable from the speaker cable connector on the I/O board.
5.
Make note of the cable routing and carefully dislodge the speaker cables from the routing guides.
6.
Remove the four screws (two on each side) that secure the speakers to the palm rest bracket.
7.
Lift the speakers off the palm rest bracket.
Replacing the Speakers
1.
Follow the procedures in
Before You Begin
.
2.
Place the speakers on the palm rest bracket.
3.
Replace the four screws (two on each side) that secure the speakers to the palm rest bracket.
4.
Route the speaker cable through the routing guides.
5.
Connect the speaker cable to the speaker cable connector on the I/O board.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.
1
screws (4)
2
palm rest bracket
3
speakers (2)
4
speaker cable connector