Dell XPS One 2720 (Mid 2013) - Manual (Page 103)

Replacing the Microphone Modules | 103
Replacing the Microphone Modules
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Procedure
1 Align the microphone modules with the microphone-module socket and insert the
microphone modules into the microphone-module socket. Ensure that the
microphone modules are secured by the tabs on the microphone-module socket.
2 Connect the microphone cables to the microphone modules.
Postrequisites
1 Follow the instructions from step 3 to step 17 in "Replacing the Display Panel" on
page 96.
2 Replace the processor heat-sink fan. See "Replacing the Processor Heat-Sink Fan"
on page 52.
3 Replace the inner frame. See "Replacing the Inner Frame" on page 50.
4 Replace the system-board shield. See "Replacing the System-Board Shield" on
page 32.
5 Replace the I/O panel. See "Replacing the I/O Panel" on page 41.
6 Replace the stand. See "Replacing the Stand" on page 22.
7 Replace the trim cover. See "Replacing the Trim Cover" on page 20.
8 Replace the back cover. See "Replacing the Back Cover" on page 18.
9 Follow the instructions in "After Working Inside Your Computer" on page 13.
OM_Book.book Page 103 Wednesday, April 3, 2013 1:39 PM