Dell XPS One 2720 (Mid 2013) - Manual (Page 28)

28 | Removing the Memory Module(s)
Removing the Memory Module(s)
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
Remove the Back Cover. See "Removing the Back Cover" on page 17.
Procedure
1 Remove the screw that secures the memory-module shield to the system-board
shield.
2 Slide the memory-module shield toward the bottom of the computer and lift it off
the system-board shield.
1 memory-module shield 2 screw
3 system-board shield
1
2
3
OM_Book.book Page 28 Wednesday, April 3, 2013 1:39 PM