Removing the optical drive, Prerequisites, Procedure – Dell XPS One 2720 (Mid 2013) User Manual

Page 25

Advertising
background image

Removing the Optical Drive |

25

Removing the Optical Drive

WARNING: Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After
working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13
. For additional safety best practices
information, see the Regulatory Compliance Homepage at

dell.com/regulatory_compliance.

Prerequisites

Remove the back cover. See "Removing the Back Cover" on page 17.

Procedure

1

Remove the screws that secure the optical-drive assembly to the middle cover.

2

Gently lift the optical-drive assembly from the middle cover and disconnect the

power and data-cable connector from the optical-drive assembly.

1

optical-drive assembly

2

screws (4)

3

power and data-cable connector

4

power and data cable

3

2

1

4

OM_Book.book Page 25 Wednesday, April 3, 2013 1:39 PM

Advertising