Dell XPS One 2720 (Mid 2013) - Manual (Page 85)

Removing the Middle Cover | 85
Procedure
1 Remove the screws that secure the side I/O-board shield to the chassis.
2 Lift the side I/O-board shield off the side I/O-board.
3 Remove the screw that secures the grounding cable to the middle cover.
4 Press the securing clips and disconnect the LVDS cables from the display assembly.
5 Disconnect the touchscreen cable from the display assembly.
1 I/O-board shield 2 screws (2)
3 grounding cable 4 grounding-cable screw
5 LVDS cable (LVDS1) 6 securing clips (4)
7 LVDS cable (LVDS2) 8 touchscreen cable
4
1
2
3
5
6
7
8
OM_Book.book Page 85 Wednesday, April 3, 2013 1:39 PM