Dell XPS One 2720 (Mid 2013) - Manual (Page 31)

Removing the System-Board Shield | 31
Removing the System-Board Shield
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 11. After working inside your computer, follow the instructions in "After
Working Inside Your Computer" on page 13. For additional safety best practices
information, see the Regulatory Compliance Homepage at
dell.com/regulatory_compliance.
Prerequisites
Remove the back cover. See "Removing the Back Cover" on page 17.
Procedure
1 Remove the screws that secure the system-board shield to the middle cover.
2 Lift the system-board shield off the middle cover.
1 screws (8) 2 system-board shield
2
1
OM_Book.book Page 31 Wednesday, April 3, 2013 1:39 PM