Dell 1125 Multifunctional Laser Printer - Manual (Page 59)

For detailed guidelines for preparing an original document, see Preparing a Document .
3. Close the scanner cover.
Making Copies
1. Load the document(s) face up, with the top edge of the document first into the ADF.
OR
Place a single document face down on the scanner glass.
For more information on loading a document, see Loading an Original Document .
2. Customize the copy settings including the number of copies, Zoom, and contrast by selecting the copy menu and using the operator panel buttons. See
Setting Copy Options .
To clear the settings, use the Cancel (V) button.
3. If necessary, you can use special copy features, such as Clone or ID copying. See Using Special Copy Features .
4. Press Start (u) to begin copying. The display shows the copy processing.
Setting Copy Options
The Copy menus on the operator panel let you customize all the basic copy options; number of copies, Zoom, and contrast. Set the following options for the
current copy job before pressing Start (u) to make copies.
Number of Copies
You can select the number of copies from 1 to 99.
1. Press Scroll (<>) to select Copy and press Select (P).
2. Press Scroll (<>) to access # of Copies and press Select (P).
NOTE: If you are copying a page from a book or magazine, lift the cover until its hinges are caught by the stopper and then close the cover. If the book
or magazine is thicker than 30 mm, copy with the cover open.
NOTE: Leaving the cover open while copying may affect the copy quality and toner consumption.
NOTE: A computer connection is not required for copying.
NOTE: Contaminates in the ADF or on the scanner glass may cause black vertical lines or black spots on the printout. For best results, clean the ADF and
the scanner glass before use. See Cleaning the Scanner .
NOTE: You can cancel the copy job at any time. Press Cancel (V) to stop copying.
NOTE: If you press Cancel (V) while you set the copy options, all of the options you have set for the current copy job may be cancelled and return to
their default status. Or, they automatically return to their default status after copying.