Sending a pc-fax, Sending a fax manually, Below) – Dell 1125 Multifunctional Laser Printer User Manual

Page 77: Confirming transmissions, Automatic redialing

Advertising
background image

the pages are scanned, select No when the display shows Another Page?.

 

5.

When the printer establishes contact with the receiving machine, it dials the number and sends the fax.

 

Sending a Fax Manually

 

1.

Load the document(s) face up with top edge first into the ADF (see

Using the Automatic Document Feeder (ADF)

)

OR

Place a single document face down on the scanner glass (see

Using the Scanner Glass

).

 

2.

Adjust the document contrast and resolution to suit your fax needs (see above).

 

3.

Press Scroll (<>) to select Fax mode and press Select (P).

 

4.

Press Scroll (<>) to select Fax Features and press Select (P).

 

5.

Press Scroll (<>) to select On Hook Dial and press Select (P).

 

6.

On Hook is displayed on the LCD. Enter the number of the remote fax machine using the keypad and press Start (u).

 

7.

Press 1. TX or 3. RX and press Start(u).

 

8.

Transmitting is displayed on the LCD. Once transmission is complete, the machine returns to Standby mode.

 

Confirming Transmissions

After a successful transmission, the printer returns to Standby mode. If enabled, the printer features an automatic confirmation system that reports after each
fax transmission. For more information, see

MSG Confirm

.

After an unsuccessful transmission, an error message is displayed on the LCD. For a listing of error messages and their meaning, see

Clearing LCD Error

Messages

.

If you receive an error message, press Cancel (V) to clear the message and try to send the document again.

 

Automatic Redialing

When the printer redial is set to On (default), the printer automatically redials the number you have dialed if it is busy.

When the display shows Awaiting Redial press Select (P) to redial the number without waiting. To cancel the automatic redialing, press Cancel (V).

To change the redial setting, see

Setting Fax Default Options

.

 

Sending a PC-Fax

It is possible to send a fax by using software applications. The Fax driver is automatically installed in the computer and is available as a printer option.

To send a PC-Fax, perform the following procedures.

 

1.

Select Print from your application.

The Print screen displays.

NOTE:

Press Cancel (V) to cancel the fax job at any time during transmission.

NOTE:

Press Cancel (V) to cancel the fax job at any time during transmission.

Advertising