Dell 1125 Multifunctional Laser Printer - Manual (Page 62)

4. Press Scroll (<>) to select 2-Up and press Select (P).
5. If necessary, customize the copy settings including number of copies, contrast, and image quality by using the Copy menus. See Setting Copy Options .
6. Press Start (u) to begin copying.
7. The documents are scanned and the 2-Up copy(ies) is produced.
Collation
See the following guide to use Collation copying:
1. Load the document to be copied into the ADF. Ensure that the document is properly inserted.
2. Press Scroll (<>) to select Copy and press Select (P).
3. Press Scroll (<>) to customize the number of copies and press Select (P). The message Saved is displayed.
4. Press Scroll (<>) to select Layout and press Select (P).
5. Press Scroll (<>) to select Collation and press Select (P).
6. Press Start (u) to begin copying.
Changing the Default Settings
The copy options, including contrast, image quality, copy size, and the number of copies, can be set to the most frequently used modes. When you copy a
document, the default settings are used unless changed using Copy menus.
To create your own default settings:
1. Press Scroll (<>) to select Copy and press Select (P).
2. Press Scroll (<>) to select Copy Defaults and press Select (P).
3. Press Scroll (<>) to scroll through the setup options described previously (see Setting Copy Options ).
4. When the option you want to set appears, press Select (P) to access the option.
5. Change the setting using the Scroll (<>) or enter the value using the number keypad.
6. Press Select (P) to save the selection.
7. Repeat steps 3 through 6, as required.
8. To return to Standby mode, press Cancel (V).
Using Dell MFP Center
Dell MFP Center is an application that enables you to copy items from your computer. Dell MFP Center runs as a separate application from:
l Windows XP: Click Start® All Programs® DELL® DELL Printers® DELL MFP 1125® Utilities® DELL MFP Center.
l Windows Vista: Click Start® All Programs® DELL® DELL MFP 1125® Utilities® DELL MFP Center.
NOTE: If the document is not inserted properly, the message Put paper in ADF is displayed.
NOTE: If necessary, customize the copy settings including number of copies, contrast, and image quality by using the Copy menus. See Setting Copy
Options .
NOTE: While you set copy options, pressing Cancel (V) cancels the changed settings and returns to the default status.
NOTE: Start Menu must be set to its original, default settings to view the following procedures.