Dell 1125 Multifunctional Laser Printer User Manual
Page 97
9.
The Auto-answer Settings screen is displayed.
10.
Select the auto-answer setting (default: Yes).
The Yes (Every incoming...) setting should be used in conjunction with a dedicated fax line. Check No (Manually answer...) if the MFP shares a line
with other devices.
11.
Click Next.
12.
The Ring Properties screen is displayed.
Select the number of rings until the MFP answers incoming calls. The default setting is five rings.
13.
Click Next.
14.
The Finished screen is displayed.
NOTE:
The preview window shows a different setup diagram depending on the selection(s) made. If all of the options are checked, the connection
diagram appears as follows.
NOTE:
If No is selected, any incoming faxes must be answered manually by pressing the user defined Receive Code on the operator panel (the default
Receive Code is *9*). See
Receive Code
for more information.