Dell Dimension 1100/B110 - Manual (Page 11)

Setting Up and Using Your Computer
11
4 Turn on the printer and then turn on the computer. If the Add New Hardware Wizard window
appears, click Cancel.
5 Install the printer driver if necessary. See the documentation that came with your printer.
Setting Up a Home and Office Network
Connecting to a Network Adapter
NOTE:
Plug the network cable into the network adapter connector on the computer. Do not plug the network cable
into the modem connector on the computer. Do not plug a network cable into a telephone wall jack.
1 Connect the network cable to the network adapter connector on the back of your computer.
Insert the cable until it clicks into place, and then gently pull it to ensure that it is secure.
2 Connect the other end of the network cable to a network device.
parallel printer cable
parallel connector on computer
connector on printer
screws (2)
clips (2)
notches (2)