Floppy drive, Removing a floppy drive – Dell Dimension 1100/B110 User Manual
Page 70
Advertising
70
Removing and Installing Parts
Floppy Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the
Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before
opening the cover.
1 Follow the procedures in "Before You Begin" on page 47.
2 Release and remove the front panel (see page 62).
NOTE:
If you are adding a floppy drive, see "Installing a Floppy Drive" on page 71.
Removing a Floppy Drive
1 Disconnect the power and data cables from the back of the floppy drive and from the system board
power cable
data cable
Advertising