Dell PowerEdge 2970 - Manual (Page 110)

110
Installing System Components
Figure 3-34. Control Panel Removal
Installing the Control Panel Assembly
1 Insert the display module into the chassis cutout and secure with the two Torx screws.
2 Affix the display module label to the display module.
3 Install the control panel board in the system chassis and secure with the three Phillips screws. See
Figure 3-34.
4 Connect the display module cable to the control panel board. See Figure 3-34.
5 Connect the control panel cable to the control panel board. See Figure 3-34.
6 Close the system. See "Closing the System" on page 56.
5
6 2
1
3
4
7
1 display module label 2 display module securing
screws (2) 3 display module
4 display module cable 5 control panel cable 6 control panel circuit board
7 control-panel circuit board
securing screws (3)