Dell PowerEdge 2970 - Manual (Page 69)

Installing System Components
69
RAID Battery
Installing a RAID Battery
1 Insert the RAID battery into the battery carrier. See Figure 3-12.
2 Locate the battery bay to the right of the SAS daughter card on top of the hard drive bays.
3 Insert the battery carrier and RAID battery into the chassis battery carrier slots and connect the battery
cable to the storage daughter card, ensuring that the battery carrier is aligned and fully seated in the
slots.
Figure 3-12. Installing a RAID Battery
1 RAID battery connector
(RAID_BATT) 2 battery cable 3 battery carrier
4 SAS RAID controller daughter
card battery 5 chassis battery carrier slot (2)
5
3
4
2
1