Ppds font error [50, Reinstall missing or unresponsive cartridge [31.xy – Dell B3460dn Mono Laser Printer User Manual

Page 122

Advertising
background image

Not enough free space in flash memory for resources [52]

Try one or more of the following:

•

From the printer control panel, press

to clear the message and continue printing.

•

Delete fonts, macros, and other data stored in the flash memory.

From the printer control panel, navigate to:

> Settings >

> Settings >

> Print Settings >

> Utilities Menu >

> Format Flash >

>

Yes >

•

Use a larger

‑capacity flash memory card.

Note: Downloaded fonts and macros that are not stored in the flash memory are deleted when the printer is turned
off or restarted.

PPDS font error [50]

Try one or more of the following:

•

From the printer control panel, press

to clear the message and continue printing.

•

If the printer cannot find the requested font, then navigate to:

> Settings >

> Settings > Print Settings >

> PPDS menu >

> Best Fit >

> On >

The printer finds a similar font and reformats the affected text.

•

Cancel the current print job.

Reinstall missing or unresponsive cartridge [31.xy]

Try one or more of the following:

•

Check if the toner cartridge is missing. If missing, install the toner cartridge.

For information on installing the cartridge, see the “Replacing supplies” section of the User’s Guide.

•

If the toner cartridge is installed, then remove the unresponsive toner cartridge, and then reinstall it.

Note: If the message appears after reinstalling the supply, then the cartridge is defective. Replace the toner
cartridge.

Reinstall missing or unresponsive imaging unit [31.xy]

Try one or more of the following:

•

Check if the imaging unit is missing. If missing, install the imaging unit.

For information on installing the imaging unit, see the “Replacing supplies” section of the User’s Guide.

•

If the imaging unit is installed, then remove the unresponsive imaging unit, and then reinstall it.

Note: If the message appears after reinstalling the supply, then the imaging unit is defective. Replace the
imaging unit.

Troubleshooting

122

Advertising