Repeating defects appear on prints, Print is too dark – Dell B3460dn Mono Laser Printer User Manual

Page 143

Advertising
background image

Repeating defects appear on prints

Action

Yes

No

Step 1

Measure the distance between the defects.

Check for a distance between the defects that equals:

97 mm (3.82 in.)

47 mm (1.85 in.)

38 mm (1.5 in.)

Is the distance between defects equal to one of the listed measurements?

Go to step 2.

1

Check if the
distance between
the defects equal
to 80 mm (3.15 in.)

2

Take note of the
distance, and then
contact

technical

support

or your

Dell printer dealer.

Step 2
Replace the imaging unit, and then resend the print job.

Do the repeating defects still appear?

Contact

technical

support

or your Dell

printer dealer.

The problem is solved.

Print is too dark

Action

Yes

No

Step 1

a

From the Quality menu on the printer control panel, reduce the toner
darkness.

Note: 8 is the factory default setting.

b

Resend the print job.

Is the print still too dark?

Go to step 2.

The problem is solved.

Troubleshooting

143

Advertising