Dell B3460dn Mono Laser Printer - Manual (Page 18)

1 Turn off the printer using the power switch, and then unplug the power cord from the electrical outlet.
2
1
2
2 Unpack the tray, and then remove all packing materials.
3 Pull the tray completely out of the base.
4 Remove any packing material from inside the tray.
5 Insert the tray into the base.
6 Place the tray near the printer.
7 Align the printer with the tray, and then lower the printer into place.
Note: Optional trays lock together when stacked.
Additional printer setup 18