Standard network software error [54, Standard parallel port disabled [56, Standard usb port disabled [56 – Dell B3460dn Mono Laser Printer User Manual

Page 124: Too many flash options installed [58, Too many trays attached [58

Advertising
background image

Standard network software error [54]

Try one or more of the following:

•

From the printer control panel, press

to confirm.

•

Unplug the router, wait for 30 seconds, and then plug it back again.

•

Turn off the printer, and then turn it back on.

•

Update the network firmware in the printer or the print server. For more information, visit the Dell support Web
site at

www.dell.com/support/printers

contact your system support person.

Standard parallel port disabled [56]

•

From the printer control panel, select Continue to clear the message. For non

‑touch‑screen printer models, press

to confirm.

Notes:

•

The printer discards any data received through the parallel port.

•

Make sure the Parallel Buffer menu is not set to Disabled.

Standard USB port disabled [56]

Try one or more of the following:

•

From the printer control panel, press

to clear the message and continue printing.

Note: The printer discards any data received through the USB port.

•

From the printer control panel, set USB Buffer to Auto.

Too many flash options installed [58]

1

Turn off the printer.

2

Unplug the power cord from the electrical outlet.

3

Remove the extra flash memory.

4

Connect the power cord to a properly grounded electrical outlet.

5

Turn the printer back on.

Too many trays attached [58]

1

Turn off the printer.

2

Unplug the power cord from the electrical outlet.

3

Remove the extra trays.

4

Connect the power cord to a properly grounded electrical outlet.

5

Turn the printer back on.

Troubleshooting

124

Advertising