Closing the system – Dell PowerEdge R200 User Manual
Page 55
Advertising
Installing System Components
55
Figure 3-3.
Installing and Removing the System Cover
Closing the System
1 Ensure that you did not leave tools or parts inside the system.
2 Place the cover over the sides of the chassis, and slide the cover forward.
3 Tighten the thumbscrew at the back of the system to secure the cover. See
Figure 3-3.
4 Replace the system in the rack, and reconnect the peripheral cables.
5 Reconnect the system to the electrical outlet, and turn on the system.
1
system cover
2
thumbscrew
1
2
book.book Page 55 Thursday, August 30, 2007 3:30 PM
Advertising