Dell Dimension 4600 - Manual (Page 56)

56 A d v a n c e d Tr o u b l e s h o o t i n g
www
.dell.com | support.dell.com
A possible USB failure has occurred. Reinstall all USB devices, check
cable connections, and then restart
the computer.
No memory modules are detected. • Reinstall all memory modules
(see page 95) and restart the
computer.
• To eliminate the possibility of a
faulty memory connector,
remove all memory modules
(see page 95), reinstall one
memory module (if the
computer supports a single
module), and then restart the
computer. If the computer starts
normally, move the memory
module to a different connector
and restart the computer.
Continue until you have
identified a faulty connector or
reinstalled all modules without
error.
Memory modules are detected, but a
memory configuration or
compatibility error exists. • Ensure that there are no special
memory module/memory
connector placement
requirements (see page 95).
• Verify that the memory modules
that you are installing are
compatible with your computer
(see page 95).
• If the problem persists, contact
Dell (see page 113).
Light Pattern Problem Description Suggested Resolution
= y e l l o w
= g r e e n
= o f f
A B C D
A B C D
A B C D
J2936bk0.book Page 56 Tuesday, September 2, 2003 3:06 PM