Dell Dimension 4600 User Manual
Page 79
Advertising
A d d i n g Pa r t s
79
8
Align the cutout on the bottom of the card with the crossbar in the system board
connector. Gently rock the card into the connector until it is fully seated.
Ensure that the card is fully seated and that its bracket is within the card slot.
card cutout
card
card connector
on system board
crossbar
fully seated card
not fully seated card
bracket caught
outside of slot
bracket
within slot
J2936bk0.book Page 79 Tuesday, September 2, 2003 3:06 PM
Advertising