Replacing the logo board, Procedure, Post-requisites – Dell Alienware 17 R2 (Early 2015) User Manual
Page 119
Replacing the logo board
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
Before working inside your computer
.
After working inside your computer, follow the instructions
in
After working inside your computer
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1
Adhere the logo board on the display bezel.
2 Connect the logo-board cable to the logo board and adhere the adhesive
tape.
3 Slide the display-board cables to their respective connectors on the logo
board and press down the latches to secure the cables.
Post-requisites
1
Replace the
.
2 Replace the
3 Follow the procedure from step 5 to step 11 in “Replacing the
”.
4 Replace the
5 Replace the
.
119