Dell Alienware 17 R2 (Early 2015) - Manual (Page 127)

Removing the Alienware
AlienHead LED board
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before working inside your computer .
After working inside your computer, follow the instructions
in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the base panel .
2 Remove the wireless card .
3 Follow the procedure from step 1 to step 9 in “Removing the palm rest ”.
4 Remove the display assembly .
5 Remove the display bezel .
6 Remove the display panel .
Procedure
1 Peel off the mylar that secures the display-board cables and the display-
panel AlienFX LEDs to the display back-cover.
2 Disconnect the camera cable from the camera module.
127