Dell Alienware 17 R2 (Early 2015) - Manual (Page 122)

Replacing the camera
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before working inside your computer .
After working inside your computer, follow the instructions
in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
NOTE: This chapter is applicable only if you have purchased a laptop with
non-touchscreen display.
1 Using the alignment posts, adhere the camera module to the display back-
cover and snap it into place.
2 Connect the camera cable to the camera module.
Post-requisites
1 Replace the display bezel .
2 Replace the display assembly .
3 Follow the procedure from step 5 to step 11 in “Replacing the palm rest ”.
4 Replace the wireless card .
5 Replace the base panel .
122