Removing the hard drive, Prerequisites, Procedure – Dell Alienware 17 R2 (Early 2015) User Manual

Page 27

Advertising
background image

Removing the hard drive

WARNING: Before working inside your computer, read the

safety information that shipped with your computer and

follow the steps in

Before working inside your computer

.

After working inside your computer, follow the instructions

in

After working inside your computer

. For more safety best

practices, see the Regulatory Compliance home page at

dell.com/regulatory_compliance.

CAUTION: Hard drives are fragile. Exercise care when

handling the hard drive.

CAUTION: To avoid data loss, do not remove the hard drive

while the computer is in sleep or on state.

Prerequisites

Remove the

base panel

.

Procedure

NOTE: Your computer can accommodate either one 2.5-inch hard drive or
four solid-state drives.

1

Using the pull tab, disconnect the hard-drive cable from the system board.

2 Note the hard-drive cable routing and remove the cable from the routing

guides on the computer base.

3 Remove the screws that secure the hard-drive assembly to the computer

base.

27

Advertising