Removing the display assembly, Prerequisites, Procedure – Dell Alienware 17 R2 (Early 2015) User Manual
Page 57
Advertising
Removing the display
assembly
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
Before working inside your computer
.
After working inside your computer, follow the instructions
in
After working inside your computer
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1
.
.
3 Follow the procedure from step 1 to step 9 in “Removing the
”.
Procedure
1
Close the display and turn the computer over.
2 Remove the screws that secure the display assembly to the computer
base.
3 Make note of the antenna-cables routing and remove the antenna cables
from the routing guides on the computer base.
57
Advertising