Dell Alienware 17 R2 (Early 2015) - Manual (Page 89)

Replacing the coin-cell
battery
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before working inside your computer .
After working inside your computer, follow the instructions
in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Adhere the coin-cell battery to the system board.
2 Connect the coin-cell battery cable to the connector on the system board.
Post-requisites
1 Replace the system board .
2 Replace the display assembly .
3 Follow the procedure from step 5 to step 11 in “Replacing the palm rest ”.
4 Replace the wireless card .
5 Replace the base panel .
89