Dell Alienware 17 R2 (Early 2015) - Manual (Page 130)

Replacing the Alienware
AlienHead LED board
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in Before working inside your computer .
After working inside your computer, follow the instructions
in After working inside your computer . For more safety best
practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Connect the camera cable to the camera module.
2 Adhere the Alienware AlienHead LED board and display-board cable to the
display back-cover.
3 Adhere the mylar to secure the Alienware AlienHead LED board and
display-board cable and to the display back-cover.
4 Adhere the mylar to secure the display-board cables and the display-panel
AlienFX LEDs to the display back-cover.
Post-requisites
1 Replace the display panel .
2 Replace the display bezel .
3 Replace the display assembly .
4 Follow the procedure from step 5 to step 11 in “Replacing the palm rest ”.
5 Replace the wireless card .
6 Replace the base panel .
130