Dell PowerEdge 800 - Manual (Page 21)

System Messages
System messages appear on the screen during system boot to notify you of a possible problem with the system. Table 2 -7 lists the system messages that can
occur and the probable cause and corrective action for each message.
Table 2-7. System Messages
Possible expansion-card failure. See " Troubleshooting Expansion Cards " in "Troubleshooting Your System."
Possible video card failure. See " Troubleshooting Expansion Cards " in "Troubleshooting Your System."
Diskette or hard-drive failure. Ensure that the diskette drive and hard drive(s) are properly connected. See " Installing
Drives " for information on the drive(s) installed in your system.
Possible USB failure. See " Troubleshooting a USB Device " in "Troubleshooting Your System."
No memory modules detected. See " Troubleshooting System Memory " in "Troubleshooting Your System."
System board failure. See " Getting Help ."
Memory configuration error. See " Troubleshooting System Memory " in "Troubleshooting Your System."
Possible system board resource and/or
system board hardware failure. See " IRQ Assignment Conflicts " in "Finding Software Solutions." If the problem persists, see
" Getting Help ."
Possible expansion card failure. See " Troubleshooting Expansion Cards " in "Troubleshooting Your System."
Other failure. Ensure that the diskette drive, optical drive, and hard drive(s) are properly connected. See
"
Troubleshooting Your System " for the appropriate drive(s) installed in your system.
If the problem persists, see " Getting Help ."
The system is in a normal operating
condition after POST. Information only.
NOTE: If you receive a system message that is not listed in Table 2 -7 , check the documentation for the application that is running when the message
appears or the operating system's documentation for an explanation of the message and recommended action.