Drive bay (see, Figure 7, These drives connect either to the – Dell PowerEdge 800 User Manual
Page 69
Advertising
7.
Remove the hard-drive bay. See
.
a.
Loosen the four screws that secure the drive bay to the system.
b.
Slide the hard-drive bay out of the system.
8.
Remove the drive from the drive bay. See
a.
Remove the screws that secure the drive in the hard-drive bay.
b.
Slide the drive out of the drive bay.
Figure 7-5. Installing or Removing a SATA Hard Drive
Figure 7-6. Installing or Removing a Cabled SCSI Hard Drive
Advertising