Replacing the top lighting-board, Postrequisites – Dell Alienware Aurora R4 (Late 2011) User Manual
Page 104
Advertising
104
Top Lighting-Board
Replacing the Top Lighting-Board
1 Align the screw holes on the top lighting-board with the screw holes on the
chassis.
2 Replace the screws that secure the top lighting-board to the chassis.
3 Connect the cables to the connectors on the top lighting-board.
Postrequisites
1 Replace the media-card reader, if installed. See "Replacing the Media-Card
2 Replace the optical drive(s). See "Replacing the Optical Drive(s)" on
1
top lighting-board
2
screws (4)
2
1
book.book Page 104 Wednesday, May 16, 2012 2:37 PM
Advertising