Postrequisites – Dell Alienware Aurora R4 (Late 2011) User Manual
Page 51
Advertising
PCI-Express x1 Card
51
2 Align the PCI-Express x1 card with the PCI-Express x1 card connector on
the system board.
3 Place the card in the connector and press down firmly. Ensure that the card
is firmly seated.
4 Connect any required cables to the card. For information on the cables to
be connected to the card, see the documentation that shipped with the
card.
5 Replace the screw that secures the card to the chassis.
Postrequisites
1 Close the PCI shroud. See "Closing the PCI Shroud" on page 46.
1 screw
2 filler bracket
1
2
book.book Page 51 Wednesday, May 16, 2012 2:37 PM
Advertising