Replacing the processor – Dell Alienware Aurora R4 (Late 2011) User Manual
Page 78
Advertising

78
Processor
Replacing the Processor
1 Ensure that the second release lever is fully extended in the open position.
CAUTION:
You must position the processor correctly in the processor socket to
avoid damage to the processor.
2 Align the pin-1 corner of the processor with the pin-1 corner of the
processor socket, and then place the processor in the processor socket.
3 When the processor is fully seated in the socket, close the processor cover.
4 Pivot the release lever down and place it under the tab on the processor
cover.
1
processor pin-1 indicator
2
processor
3
alignment notches (4)
4
alignment tabs (4)
5
processor socket
5
4
3
1
2
book.book Page 78 Wednesday, May 16, 2012 2:37 PM
Advertising