Dell Alienware Aurora R4 (Late 2011) - Manual (Page 86)

86 Power Supply
Replacing the Power-Supply Unit
1 Align the screw holes on the power-supply unit with the screw holes on the
bezel.
2 Replace the screws that secure the power-supply unit to the bezel.
3 Slide the power-supply unit into the chassis through the back of the
computer.
4 Tighten the captive screws that secure the power-supply unit to the back of
the chassis.
5 Connect the DC-wire harness to the power-supply unit.
6 Align the notch on the power-supply cover with the tab on the chassis.
7 Slide the power-supply cover towards the tabs until it locks in place.
1 bezel 2 power-supply unit
3 screws (4)
2
3
1
book.book Page 86 Wednesday, May 16, 2012 2:37 PM