Pci-fan, Prerequisites, Removing the pci-fan – Dell Alienware Aurora R4 (Late 2011) User Manual
Page 53
PCI-Fan Assembly
53
10
PCI-Fan
WARNING:
Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before You Begin" on
page 13. For additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.
WARNING:
The heat sink may be very hot during normal operation. Provide
sufficient time for the heat-sink to cool before you touch it.
Prerequisites
1 Remove the left side-panel. See "Removing the Left Side-Panel" on
Removing the PCI-Fan
1 Open the PCI shroud. See "Opening the PCI Shroud" on page 45.
2 Remove the drive-bay shroud. See "Removing the Drive-Bay Shroud" on
3 Disconnect the PCI-fan cable from the FAN_PCI connector on the master
I/O board.
4 Press the tabs and lift the PCI-fan out of the metal brackets on the chassis.
book.book Page 53 Wednesday, May 16, 2012 2:37 PM