Memory fan, Prerequisites, Removing the memory fan – Dell Alienware Aurora R4 (Late 2011) User Manual

Page 67

Advertising
background image

Memory Fan

67

13

Memory Fan

WARNING:

Before working inside your computer, read the safety information

that shipped with your computer and follow the steps in "Before You Begin" on
page 13. Fo
r additional safety best practices information, see the Regulatory
Compliance Homepage at dell.com/regulatory_compliance.

WARNING:

The heat sink may be very hot during normal operation. Provide

sufficient time for the heat-sink to cool before you touch it.

Prerequisites

1 Remove the left side-panel. See "Removing the Left Side-Panel" on

page 25.

Removing the Memory Fan

1 Disconnect the memory fan cable from the

MEM_FAN

connector on the

top lighting-board.

2 Pull the release tab towards the bottom of the computer and lift the

memory fan out of the chassis.

book.book Page 67 Wednesday, May 16, 2012 2:37 PM

Advertising