Replacing the wifi/bluetooth card, Postrequisites – Dell Alienware Aurora R4 (Late 2011) User Manual
Page 138
Advertising
138
WiFi/Bluetooth Assembly
Replacing the WiFi/Bluetooth Card
1 Align the tab on the WiFi/Bluetooth assembly with the slot on the chassis
and slide it into position.
2 Tighten the thumbscrew that secures the WiFi/Bluetooth assembly to the
chassis.
3 Connect the WiFi/Bluetooth assembly cable to the connector on the master
I/O board.
Postrequisites
1 Replace the drive-bay shroud. See "Replacing the Drive-Bay Shroud" on
2 Close the PCI shroud. See "Closing the PCI Shroud" on page 46.
1
WiFi/Bluetooth assembly
2
thumbscrew
1
2
book.book Page 138 Wednesday, May 16, 2012 2:37 PM
Advertising