Replacing the drive-bay shroud, Postrequisites – Dell Alienware Aurora R4 (Late 2011) User Manual
Page 48
Advertising
48
Drive-Bay Shroud
Replacing the Drive-Bay Shroud
1 Align the drive-bay shroud with the slots on the chassis.
2 Slide the drive-bay shroud toward the front of the chassis until it clicks
into place.
Postrequisites
1 Replace the left side-panel. See "Replacing the Left Side-Panel" on
2 Follow the steps in "After Working Inside Your Computer" on page 15.
3 Close the PCI shroud. See "Closing the PCI Shroud" on page 46.
1 tabs (2)
2 drive-bay shroud
1
2
book.book Page 48 Wednesday, May 16, 2012 2:37 PM
Advertising