Dell Broadcom NetXtreme Family of Adapters - Manual (Page 135)

Broadcom Teaming Services: Broadcom NetXtreme II® Network Adapter User Guide
file:///C|/Users/Nalina_N_S/Documents/NetXtremeII/English/teamsvcs.htm[9/5/2014 3:45:08 PM]
5 Informational configured for 10Mb
full-duplex link.
manually configured for
the selected line speed
and duplex settings.
No action is required.
6 Informational
Network controller
configured for 100Mb
half-duplex link.
The adapter has been
manually configured for
the selected line speed
and duplex settings.
No action is required.
7 Informational
Network controller
configured for 100Mb
full-duplex link.
The adapter has been
manually configured for
the selected line speed
and duplex settings.
No action is required.
8 Informational
Network controller
configured for 1Gb half-
duplex link.
The adapter has been
manually configured for
the selected line speed
and duplex settings.
No action is required.
9 Informational
Network controller
configured for 1Gb full-
duplex link.
The adapter has been
manually configured for
the selected line speed
and duplex settings.
No action is required.
10 Error
Unable to register the
interrupt service
routine.
The device driver cannot
install the interrupt
handler.
Reboot the operating system; remove other
device drivers that may be sharing the same
IRQ.
11 Error
Unable to map IO
space.
The device driver cannot
allocate memory-
mapped
I/O to access driver
registers.
Remove other adapters from the system, reduce
the amount of physical memory installed, and
replace the adapter.
12 Informational Driver initialized
successfully.
The driver has
successfully loaded.
No action is required.
13 Error
Driver initialization
failed.
Unspecified failure during
driver initialization.
Reinstall the driver, update to a newer driver,
run Broadcom Advanced Control Suite
diagnostics, or replace the adapter.
14 Error
This driver does not
support this device.
Upgrade to the latest
driver.
The driver does not
recognize the installed
adapter.
Upgrade to a driver version that supports this
adapter.
15 Error
This driver fails
initialization because
the system is running
out of memory.
Insufficient system
memory prevented the
initialization of the
driver.
Increase system memory.
Please read all Restrictions and Disclaimers .
Back to Contents Page