Dell Broadcom NetXtreme Family of Adapters User Manual
Page 231
Specifications: Broadcom NetXtreme II® Network Adapter User Guide
file:///C|/Users/Nalina_N_S/Documents/NetXtremeII/English/specs.htm[9/5/2014 3:45:19 PM]
10 Mbit
1.12
3.71
Table 11: BCM57710/BCM57711/BCM57712 NIC Power Requirements
Link
NIC 12V Current Draw (A) NIC 3.3V Current Draw (A) NIC Power (W)
Idle (no link)
0.60
0.28
8.12
Low power mode 0.50
0.35
7.16
10GBASE-T link
1.23
1.79
20.67
10GBASE-T traffic 1.24
1.95
21.32
Note:
Power, measured in watts (W), is a direct calculation of total current draw (A) multiplied by voltage (V). The
maximum power consumption for the adapter will not exceed 30W.
Table 12: BCM957810A1006G NIC Power Requirements
Link
NIC 12V Current Draw (A) NIC 3.3V Current Draw (A) NIC Power (W)
10 SFP Module 1.37
0.004
16.41
Power, measured in watts (W), is a direct calculation of total current draw (A) multiplied by voltage (V). The maximum
power consumption for the adapter will not exceed 30W.
Table 13: BCM957810A1008G NIC Power Requirements
Link
NIC 12V Current Draw (A) NIC 3.3V Current Draw (A) NIC Power (W)
Idle (no link)
0.58
0.004
6.88
100BASE-T link 0.67
0.004
8.07
1000BASE-T link 0.83
0.004
9.90
10GBASE-T link 1.37
0.004
16.41
Power, measured in watts (W), is a direct calculation of total current draw (A) multiplied by voltage (V). The maximum
power consumption for the adapter will not exceed 30W.
Table 14: BCM957840A4006G Mezzanine Card Power
Requirements
Link
Total Power (12V and 3.3VAUX) (W)
Idle (no link)
7.206
PCIe Disable
6.634
Play Dead Mode
4.078
1000BASE-T link
8.53
10GBASE-T link
8.89
Standby WOL Enabled 4.7064
Standby WOL Disabled 0.4791W
Power, measured in watts (W), is a direct calculation of total current draw (A) multiplied by voltage (V). The maximum
power consumption for the adapter will not exceed 30W.
Table 15: BCM957840A4007G Mezzanine
Card Power Requirements
Link
Total Power (3.3V) (W)
Idle (no link)
5.7
Standby mode
2.2
1000BASE-T link 6.2
10GBASE-T link 6.5
Power, measured in watts (W), is a direct calculation of total current draw (A) multiplied by voltage (V). The maximum
power consumption for the adapter will not exceed 30W.