Dell Broadcom NetXtreme Family of Adapters User Manual

Page 99

Advertising
background image

iSCSI Protocol: Broadcom NetXtreme II® Network Adapter User Guide

file:///C|/Users/Nalina_N_S/Documents/NetXtremeII/English/iscsi.htm[9/5/2014 3:45:06 PM]

32

Information Initiator received an asynchronous logout message. The Target name is given in the dump data.

33

Error

Challenge size given by the target exceeds the maximum specified in iSCSI specification.

34

Information A connection to the target was lost, but Initiator successfully reconnected to the target. Dump data

contains the target name.

35

Error

Target CHAP secret is smaller than the minimum size (12 bytes) required by the specification.

36

Error

Initiator CHAP secret is smaller than the minimum size (12 bytes) required by the specification.

Dump data contains the given CHAP secret.

37

Error

FIPS service could not be initialized. Persistent logons will not be processed.

38

Error

Initiator requires CHAP for logon authentication, but target did not offer CHAP.

39

Error

Initiator sent a task management command to reset the target. The target name is given in the

dump data.

40

Error

Target requires logon authentication via CHAP, but Initiator is not configured to perform CHAP.

41

Error

Target did not send AuthMethod key during security negotiation phase.

42

Error

Target sent an invalid status sequence number for a connection. Dump data contains Expected Status

Sequence number followed by the given status sequence number.

43

Error

Target failed to respond in time for a login request.

44

Error

Target failed to respond in time for a logout request.

45

Error

Target failed to respond in time for a login request. This login request was for adding a new

connection to a session.

46

Error

Target failed to respond in time for a SendTargets command.

47

Error

Target failed to respond in time for a SCSI command sent through a WMI request.

48

Error

Target failed to respond in time to a NOP request.

49

Error

Target failed to respond in time to a Task Management request.

50

Error

Target failed to respond in time to a Text Command sent to renegotiate iSCSI parameters.

51

Error

Target failed to respond in time to a logout request sent in response to an asynchronous message

from the target.

52

Error

Initiator Service failed to respond in time to a request to configure IPSec resources for an iSCSI

connection.

53

Error

Initiator Service failed to respond in time to a request to release IPSec resources allocated for an

iSCSI connection.

54

Error

Initiator Service failed to respond in time to a request to encrypt or decrypt data.

55

Error

Initiator failed to allocate resources to send data to target.

56

Error

Initiator could not map an user virtual address to kernel virtual address resulting in I/O failure.

57

Error

Initiator could not allocate required resources for processing a request resulting in I/O failure.

58

Error

Initiator could not allocate a tag for processing a request resulting in I/O failure.

59

Error

Target dropped the connection before the initiator could transition to Full Feature Phase.

60

Error

Target sent data in SCSI Response PDU instead of Data_IN PDU. Only Sense Data can be sent in

SCSI Response.

61

Error

Target set DataPduInOrder to NO when initiator requested YES. Login will be failed.

62

Error

Target set DataSequenceInOrder to NO when initiator requested YES. Login will be failed.

63

Error

Cannot reset the target or LUN. Will attempt session recovery.

64

Information Attempt to bootstrap Windows using iSCSI NIC Boot (iBF).

65

Error

Booting from iSCSI, but could not set any NIC in Paging Path.

66

Error

Attempt to disable the Nagle Algorithm for iSCSI connection failed.

67

Information If Digest support selected for iSCSI Session, will use Processor support for Digest computation.

68

Error

After receiving an async logout from the target, attempt to relogin the session failed. Error status is

given in the dump data.

69

Error

Attempt to recover an unexpected terminated session failed. Error status is given in the dump data.

70

Error

Error occurred when processing iSCSI logon request. The request was not retried. Error status is

given in the dump data.

71

Information Initiator did not start a session recovery upon receiving the request. Dump data contains the error

status.

Advertising