Dell Broadcom NetXtreme Family of Adapters - Manual (Page 202)

Using Broadcom Advanced Control Suite 4: Broadcom NetXtreme II® Network Adapter User Guide
file:///C|/Users/Nalina_N_S/Documents/NetXtremeII/English/bacs.htm[9/5/2014 3:45:16 PM]
Session format error
The number of sessions with errors due to inconsistent fields, reserved fields not 0, non-existent LUN, etc.
Sessions failed
The number of failed sessions.
Custom
Custom statistics.
Total Offload iSCSI Connections
The total number of offloaded iSCSI connections.
Session Statistics
The statistics in this area only pertain to the named session.
Session Name
The name used for the session between the initiator and the target.
Session Id
The identifier used for the session between the initiator and the target.
Bytes sent
The number of bytes sent for the named session.
Bytes received
The number of bytes received for the named session.
PDU sent
The number of iSCSI PDUs sent for the named session.
PDU received
The number of iSCSI PDUs received for the named session.
Digest errors
The number of errors due to an invalid payload or header for the named session.
Connection Timeout errors
The number of connection timeout errors for the named session.
Format errors
The number of errors due to inconsistent fields, reserved fields not 0, non-existent LUN, etc. for the named session.
IEEE 802.3 Statistics
Frames Rx with Alignment Error
A count of the frames that were not an integral number of octets in length and do not pass the FCS check. This counter is
incremented when the receive status is reported as Alignment Error.
Frames Tx with one Collision
A count of the frames that were involved in a single collision and were subsequently transmitted successfully. This counter is
incremented when the result of a transmission is reported as Transmit OK, and the attempt value is 2.
Frames Tx with more than one Collision