Dell Vostro V130 (Late 2010) - Manual (Page 15)

10. Remove the hard drive from the hard-drive bracket.
NOTE: To install the audio board and the hard drive, see Installing The Hard Drive And Audio Board Assembly .
Installing The Hard Drive And Audio Board Assembly
To remove or locate the hard drive and audio board, see Removing The Hard Drive And Audio Board Assembly .
1. Attach the hard-drive bracket to the hard drive.
2. Tighten the screws to secure the hard-drive bracket to the hard drive.
3. Connect the audio board to the hard drive.
4. Tighten the screws to secure the audio board and hard drive to the computer.
5. Connect the hard-drive data and speaker cable to the audio board.
6. Install the battery .
7. Install the base cover .
8. Install the Secure Digital (SD) card .
9. Follow the procedures in After working inside your computer .
15