Dell Vostro V130 (Late 2010) - Manual (Page 52)

Installing The Card-Reader Board
NOTE: To remove or locate the card-reader board, see Removing The Card-Reader Board .
1. Place the card-reader board in the card-reader board bay.
2. Connect card-reader cable to the system board.
3. Replace and tighten the screws that secure the card-reader board to the computer.
4. Install the audio and hard drive assembly .
5. Install the battery .
6. Install the base cover .
7. Install the Secure Digital (SD) card .
8. Follow the procedures in After working inside your computer .
52