Dell Vostro V130 (Late 2010) - Manual (Page 58)

16. Remove the display hinges.
NOTE: To replace the display hinges see Installing The Display Hinges .
Installing The Display Hinges
NOTE: To remove or locate the display hinges, see Removing The Display Hinges .
1. Place the display hinges in the appropriate positions.
2. Tighten the screws to secure the left and right display hinges.
3. Insert the cable holders in both the display hinges.
4. Replace and tighten the screws securing each cable holder.
5. Install the display bezel .
6. Install the palmrest and display assembly .
7. Install the system board .
8. Install the keyboard .
9. Install the memory .
10. Install the LED cover .
11. Install the wireless wide area network (WWAN) card
12. Install the wireless local area network (WLAN) card .
13. Install the battery
14. Install the base cover .
15. Install the secure digital (SD) card .
16. Follow the procedures in After Working Inside Your Computer .
58